© Kurth Electronic GmbH, All Rights Reserved
12
Saving phone numbers
To save a call number, use the F2 key to select the PRG mode. The desired
memory location (0 – 9) is requested and selected by pressing one of the keys
0 – 9. If a number is already stored, it is displayed.
Stored numbers can be deleted completely with F1 (DEL) or individually from
behind with the < key. If new numbers or an extension are entered, both
Pause (F3) (2 sec) and Flash (both also multiple times) can be inserted and
saved. Press F2 (STO) to save.
Dialling from the speed-dial memory
The line is assigned the TALK key.
LNR Re-dialling the last three outgoing numbers
CID RCL Re-dialling the last three incoming numbers
MR Retrieval of indirect memory locations (0 – 9)
When a dial tone is audible, dialing can begin. The call is made by pressing
the LNR or CID RCL key, scrolling through the stored numbers each time the
key is pressed. If MR is selected, followed by a number key, the correspon-
ding number is retrieved from the respective speed dial memory. The number
is dialled with SEL.
To Next Page
Loading...