Kurth Electronic TP09D - Main Functions

© Kurth Electronic GmbH, All Rights Reserved
3
The TP09D is a rugged and waterproof analogue test phone with a back-
lit graphic display, protected keyboard, menu-driven operation and caller ID
(CLIP), message waiting indicator (MWI), DTMF grabbing, line voltage and
current, high-impedance monitor, overvoltage and undervoltage lockout, data
security through high-impedance monitor, open listening for monitor and tele-
phony and calling
Main functions
RING
TP09D switched o󰀨. Default setting is on hook. Waiting for incoming call
with or without CLIP information.
TALK
TP09D switched on. Pressing the o󰀨 Hook key displays: Line allocation,
information in display such as device mode, dialing mode, programming,
charge pulses, line voltage, line current, battery status, dialed number, caller
ID, speed dial memory.
ON
Switch on TP09D with the ON button. The following functions can be selected
immediately:
F1 = Conguration menu
F2 = PRG – Programming the speed dial
F4 = MON – Line Monitor on / o󰀨