Kurth Electronic TP09D - Technical Specifications; General Device Data

© Kurth Electronic GmbH, All Rights Reserved
15
Technical Specications
Line Impedance Complex or Real
Pulse dial Rate: 10 pps +/-5%
Ratio: 40 / 60, 33 / 66
Tone dial Freq. Error: +/- 1%
Level: High group -6 dBm
Low group -8 dBm
Flash times 100 ms, 270 ms, 600 ms
Pause duration 2 sec per key press
Memory 2 programm., 1 LNR, 1 CID RCL with 24 digits each
10 indirect memory locations with 24 digits each
Monitor-Impedanz > 120 kOhm bei 100 kHz
> 500 kOhm bei 4 kHz
General device data
Power supply 9 V Alkaline Battery
Display Graphical display
Housing Stable and impact-resistant weatherproof ABS
housing with membrane keyboard, waterproof
sealing IP54
Test cords 150 cm long test cords made of exible PVC with
crocodile clips, exchangeable on site
Strain relief of the test cords
Separate battery compartment with captive screw
Dimensions 250 x 80 x 30 / 70 mm
Weight 450 g with battery