10-76
KDFX Reference
KDFX Algorithm Specifications
Dly FBImag, Dly Xcouple, Dly HFDamp, and Dly LFDamp are just like those found in other algorithms.
Not all Laser Delays in combination algorithms will have all four of these parameters due to resource
allocation.
Figure 10-29 Laser Delay (left channel)
Parameters for Laser Delay
Dly Time Left and Right. The delay lengths of each channel in beats. The duration of a beat is
speciÞed with the Tempo parameter. The delay length in seconds is calculated as beats/
tempo * 60 (sec/min).
Dly Fdbk Left and Right. The amount of the output of the effect that is fed back to the input.
Dly HFDamp Controls the cutoff frequency of a 1 pole (6dB/oct slope) lopass Þlter in the feedback path.
The Þlter is heard when either Dly Fdbk or LsrCntour is used.
Dly LFDamp Controls the cutoff frequency of a 1 pole (6dB/oct slope) hipass Þlter in the feedback path.
The Þlter is heard when either Dly Fdbk or LsrCntour is used.
Dly FBImag This parameter controls the amount of image shifting during each feedback regeneration,
and is heard only when Dly Fdbk is used. Small positive values shift the image to the
right, while small negative values shift to the left. Larger values tend to shift the image so
far that the image gets scrambled, and in some cases create ambience.
Dly Time L 0 to 6 bts Dly Time R 0 to 6 bts
Dly Fdbk L -100 to 100 % Dly Fdbk R -100 to 100 %
Dly HFDamp 0 to 32 bts Dly FBImag -100 to 100 %
Dly LFDamp 0.10 to 6.00 x Dly Xcple 0 to 100%
LsrCntourL 0 to 100 % LsrCntourR 0 to 100 %
LsrSpace L 0 to 100 samp LsrSpace R 0 to 100 samp
L Input
XCouple
Imaging
L Output
From Right
Channel
To Right
Channel
Channel
From Right
Channel
To Right
Delay Feedback
Delay
Laser
Element
To Next Page
Loading...
