Setup Mode and the Setup Editor
Controllers
7-25
35 Tempo MIDI Clock tempo
36 MuteZn Mute current zone
37 KeyNum Key Number–sends a MIDI note with a velocity defined by the
last value for KeyVel
38 KeyVel Key Velocity
39 TapTempo Enables you to tap a switch controller (like FtSw1–4 or PSw1–2)
to change the K2600’s internal tempo setting
40 ArpOrder Change the order of arpeggiated notes
41 ArpBeats Change the number of arpeggiated notes per beat
42 ArpShift Change the amount of arpeggiator shift
43 ArpLimit Change the arpeggiator shift limit
44 ArpLmtOp Change the arpeggiator limit option
45 ArpVel Change the attack velocity of arpeggiated notes
46 ArpDur Change the duration of arpeggiated notes
47–63 Off Reserved for future use
64 Sustain Default destination for Footswitch 1
65 PortSw Monophonic K2600 programs respond to this controller if
portamento is turned on
66 SostPd Default destination for Footswitch 2–holds notes that are
currently down, but not notes played subsequently
67 SoftPd Default destination for Footswitch 3– lowers the volume by a
preset amount and may soften the timbre as well
68 LegatoSw Forces mono playback
69 FrezPd Envelopes freeze at current state
70–79 MIDI 70–79 MIDI Controllers 70–79
80 Ctl E
81 Ctl F
82 Ctl G
83 Ctl H
84–90 MIDI 84–90 MIDI Controllers 84–90
91 FX Depth Controls wet/dry mix of effects
92–95 MIDI 92–95 MIDI Controllers 92–95
96 DataInc Data Increment
97 DataDec Data Decrement
98–101 MIDI 98–101 MIDI Controllers 98–101
102 Play/Stp Alternately starts and stops sequencer playback
103 Rec/Stop Alternately starts and stops sequencer recording
104–115 MIDI 104–115 MIDI Controllers 104–115
116 ArpSw Arpeggiator On/Off
MIDI
Controller
Number
Corresponding
Destination
Name
Description
Table 7-5 MIDI Control Source List (Continued)
To Next Page
Loading...
