Kurzweil K2600 - Page 30

7-30
Setup Mode and the Setup Editor
The RIBBON Page
The Þrst of the following diagrams shows how the RIBBON page looks when the Large Ribbon
is conÞgured in one sections. The second shows the RIBBON page for a three-section Large
Ribbon.
EditSetup*RIBBON||||||||||||||<>Zone1/1|
|||||||Dest:|||Scale:Add:Curv:Ent:|Exit:
SmRib:|AuxBend2|100%|0|||Lin||None|None|
SmPrs:|MPress|||100%|0|||Lin||None|None|
LgRib:|AuxBend1|100%|0|||Lin||None|None|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
<more||RIBBON|WHEEL||SWITCH|PRESS||more>
EditSetup*RIBBON||||||||||||||<>Zone1/1|
|||||||Dest:|||Scale:Add:Curv:Ent:|Exit:
SmRib:|AuxBend2|100%|0|||Lin||None|None|
SmPrs:|MPress|||100%|0|||Lin||None|None|
Sect1:|AuxBend1|100%|0|||Lin||None|None|
Sect2:|CtlD|||||100%|0|||Lin||None|None|
Sect3:|MIDI20|||100%|0|||Lin||None|None|
<more||RIBBON|WHEEL||SWITCH|PRESS||more>
Parameter Range of Values Default
Destination (SmRib) MIDI Control Source list AuxBend2
Destination (SmPrs) MIDI Control Source list MPress
Destination (LgRib) MIDI Control Source list AuxBend1
Scale ±300% 100%
Add -128 to +127 0
Curve Curve list (see text) Lin
Entry Value None, 0–127 None
Exit Value None, 0–127 None