Installing in Rack-Mount Models
19
2. Grasp the board as shown in Figure 13, so that the
chips face away from you when you insert the
connecting edge of the board into the socket. Notice the
semi-circular notch at the center of the connecting
edge. This notch aligns with a key on the SIMM socket,
and ensures that you position the board correctly in the
socket.
Figure 13 Proper orientation of option board
3. Place the option board in the connection slot in the
SIMM socket, aligning the notch in the board with the
key in the socket. The board will rotate toward you
when you release it.
To Next Page
Loading...