Installing in Rack-Mount Models
21
5. Figure 15 shows how the option board looks when it’s
installed properly on the Engine Board.
Figure 15 Option board properly installed on Engine
Board
Installing the PCR-1 /PCR-2 Board on PCX-1 Board
This section is only for those who have installed the PCX-1
Polyphony Expansion option in their instruments. If you
haven’t installed the PCX-1 option, please skip this section
and proceed to Reassembly and Hardware Verification on
page 25. If you have installed the PCX-1 option, follow the
instructions in this section, then proceed to Reassembly and
Hardware Verification.
To Next Page
Loading...