Installing in Rack-Mount Models
23
2. Grasp the board as shown in Figure 17, so that the
chips face toward you when you insert the connecting
edge of the board into the socket. Notice the semi-
circular notch at the center of the connecting edge. This
notch aligns with a key on the SIMM socket, and
ensures that you position the board correctly in the
socket.
Figure 17 Proper orientation of option board
3. Place the option board in the connection slot in the
SIMM socket, aligning the notch in the board with the
key in the socket. The board will rotate away from you
when you release it.
To Next Page
Loading...