Need help?Do you have a question about the Kverneland 4328LT and is the answer not in the manual?
Distinguishes between L-model (LH drawbar) and C-model (Centre drawbar) frame configurations.
Details technical specifications for 43xxT and 43xxR models, including weight, dimensions, and performance.
Provides weight distribution and dimensional data for various machine models and drawbar types.
Illustrates safety labels on the machine and explains their meaning and importance for user safety.
Details the meaning of various warning, danger, and caution symbols related to machine operation and maintenance.
Guides on connecting the machine to the tractor, including clevis and PTO shaft settings.
Explains hydraulic connections, valve settings, and cylinder operation for tractor attachment.
Instructions for selecting the correct PTO RPM for the swivel gearbox based on machine configuration.
Details on bleeding, setting, and torque specifications for the friction clutch.
Explains the Semi Swing tine system and conditioner plate adjustments for different crop conditions.
Guides on pulley changes, belt tension, roller pressure, and distance adjustments.
Procedures for adjusting low and high stubble height using connecting links and skids.
Table and guidelines for selecting appropriate skids based on cutting height requirements.
Illustrations showing the correct placement of high skids for various cutter bar disc counts.
Instructions for adjusting cutting unit balance and ground pressure using springs and bolts.
Guidance on adjusting deflector plates for optimal swath gathering and spreading.
Comprehensive schedule detailing checks, lubrication, oil changes, and replacements at various intervals.
Procedures for cutter bar disassembly, repair, bearing replacement, and assembly.
Details on swivel, main, and centre gearbox disassembly, assembly, lubrication, and oil change procedures.
Instructions for roller replacement, synchronizing, and maintenance procedures.
Recommended greases and lubrication intervals for different machine models and components.
Torque values for PTO shaft, cone, discs, blades, and cutter bar connections.
Procedures for checking and replacing soles/skids, conditioners, and rollers.
Schematics illustrating hydraulic circuits for steering and lifting cylinders for various drawbar types.
Detailed diagrams and part numbers for hydraulic cylinders and associated kits.
Information on accumulators and inline relief valves, including their function and setting.
Wiring diagram for the lighting kit in European configurations.
Wiring diagram for the lighting kit in North American configurations.
Details on BX equipment for swath management and flip-over spreading devices.
Information on fitting throwing wings to improve crop flow and high skids for stubble height.
Options for tractor lift arm chains, hitch types, and cutter bar protection.
Information on PTO shaft options and the function of the hour counter.
Details on kits to change rotor and roller speeds for various crop conditions.
Diagnoses and solutions for faults related to hydraulic functions and the PTO shaft.
Troubleshooting guide for cutter bar alignment, stubble issues, swath patterns, and cutting unit shocks.
Addresses problems with conditioning too weak, crop flow blockage, and abnormal wear.
General| Brand | Kverneland |
|---|---|
| Model | 4328LT |
| Category | Farm Equipment |
| Language | English |
To Next Page