P 1.1
SECTION I
Specifications
086A 7 01
THE TYPE 086A and 086AS
MACHINE
SEMI - AUTOMATICALLY CLOSES
PLASTIC BAGS
WITH THE STRIPLOK
® CLOSURE
OR THE STRIPLOK CLOSURE LABEL
A. The closing machine designated Type 086A can
run standard R, RJ, and S series closures, and
series L and U labels.
B. The system will close a wide range of product
size variations. The Striplok closures are available
in many closure opening sizes to accommodate a
large number of variations in bag width and film
material thickness.
Upon request and upon receipt of sample bags,
the factory will gladly recommend the proper
closure opening sizes. Use the bag length formula
found in the appendix of this manual to help
determine the proper bag length needed.
C. A suggested spare parts inventory is listed in the
appendix. To save valuable time, it is recommend-
ed that an adequate supply of these parts be kept
on hand for needed repairs.
To Next Page
Loading...