Kwik Lok 086A - Parts Identification

P 5.1
SECTION V
Parts Identification
086A 7 01
PARTS ORDERING PROCEDURE
IMPORTANT: When ordering parts, ALWAYS:
1) Specify on the order the TYPE, MODEL, and SERIAL NUMBER of the machine for
which the parts are being ordered. This information can be found on the machine nameplate.
2) DO NOT order by item number. Order by PART or KIT number.
To order individual parts, be sure to do the following:
1) Identify the needed parts by referring to the assembly illustrations.
Each part is assigned an item number on the illustration.
2) Refer to the parts list. Locate the item number for the part to be ordered.
Opposite the item number is the part number and description for that part.
3) Again, specify on the order the TYPE, MODEL, and SERIAL NUMBER for which the
parts are being ordered. This information is located on the machine nameplate.