Version: V1.2.20070627
Date: 2007/6/27
File Name: DVB-T 355U FAQ
Author : Ben Sung
5
Click “Driver Installation” to install driver.
1. Once you finish the hardware installation, restart your operating system.
“Windows Found New Hardware Wizard” will pop up. Please click “Cancel”
and run the utilities setup included in the CD.
Note: If you use “Windows Found New Hardware Wizard” to install, remote
program will not install automatically. Remote function will not work properly.
2. After put the CD into CD ROM, it will auto run the program a second (the speed
depend on your CD ROM speed). On the auto run page, please select “Driver
Installation” to install driver.
3. A notice of New Hard ware Wizard will disappear after you install driver properly,
if it appear when you installing, please ignore it.
Note: After finish driver installation, please install application as well before
restart operating system.
Please press “DVB-T PLUS” (application install wizard) to install DVB-T PLUS.
1. Insert the installation CD disk into the CD-ROM drive. The Auto run Page will
appear, please select “DVB-T PLUS”.
2. Then the install wizard will guide you to install it, please click “Next” to continue.
3. Please choose destination location where you want to install files. Click “Browse”
if you want to change the destination folder.
4. “Setup” program will add program icons to the Program Folder listed below. You
may type a new folder name, or select one from the existing folders list. Click
“Next” to start installing. Please wait while installation in process.
5. After driver of DVB-T PLUS has been installed, please click “Finish” to end the
installation.
After installation the short cut of DVB-T PLUS showing on your desktop. You can
press the short cut to open the application to watch TV.
To Next Page
Loading...
Need help?
General
