WHEEL RIM
Check the wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
FRONT WHEEL BEARING
Remove the side collar and dust seal.
Turn the inner race of each bearing with your
finger to see if they turn smoothly and
quietly. Also check if the outer race fits
tightly in the hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the
hub.
BEARING REPLACEMENT
Remove the front wheel bearings and distance
collar.
Special Tools
Bearing Remover
Bearing Remover Head, 12mm
To Next Page
Loading...
Need help?
General