Need help?Do you have a question about the KYMCO B&W 150 and is the answer not in the manual?
General| Ignition | CDI |
|---|---|
| Starting System | Electric & Kick |
| Front Suspension | Telescopic Fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Max Torque | 11.8 Nm @ 6500 rpm |
| Bore x Stroke | 57.4 mm x 57.8 mm |
| Transmission | CVT |
Explains the function of the ignition switch positions: ON, OFF, and LOCK, and the method to lock the handlebar.
Instructions on how to use the electric starter button for engine ignition, including cautions.
Emphasizes the importance of pre-ride inspections for safety and preventing damage or accidents.
Provides instructions on how to check and refill the engine oil level using the oil dipstick.
How to check the brake performance and free play of the brake levers.
Guide to inspecting tire pressure, cracks, damage, foreign objects, and tread depth for safety.
Instructions on how to check the fuel level and refill the fuel tank, including cautions.
Checking the brake fluid level in the reservoir and inspecting brake shoes for wear.
Checking the braking effect by applying front and rear brake levers and moving the motorcycle.
Steps to turn the ignition switch ON, unlock the handlebar, and check fuel/oil levels.
How to lock the rear wheel using the brake lever to ensure safety during starting.
Detailed instructions on using the electric starter button for engine ignition, including timing and cautions.
Procedure for starting the engine using the kick lever, including cold start and warm-up.
Best practice for braking by restoring throttle and applying both brake levers gradually.
Warnings against sudden stops and sharp turns, especially in rain, to prevent slipping.
Guide to inspecting, cleaning, and replacing the air cleaner element for optimal engine performance.
Step-by-step guide for changing the engine oil, including oil type, capacity, and frequency.
Instructions for checking and changing the transmission gear oil, including recommended type and capacity.
To Next Page
