KYMCO Bet&Win User Manual

Guidelines on appropriate clothing, helmet, and footwear for safe motorcycle riding.

Advice on sitting position, leaning for turns, and riding on uneven roads.

Instructions for maintaining posture and avoiding overload when carrying items.

Explains the functions of the ignition switch and how to lock the steering handlebar.

Instructions on using the electric starter button to start the engine.

Details the different positions and functions of the headlight switch.

Explains the use of high/low beams and the passing signal function.

Instructions for operating the horn and turn signal switches.

How to open and close the seat lock and use the met-in box.

Steps for securing a helmet using the buckle under the seat.

Explanation of the various gauges and indicators on the instrument panel.

Emphasizes the necessity of pre-ride checks for safety and vehicle condition.

Procedure for checking and refilling the motor oil.

How to inspect the front and rear brakes for proper function and free play.

Guidelines for checking tire pressure and overall condition.

Checking tires for cracks, damage, and abnormal wear.

Instructions on checking tire tread depth and when to replace tires.

How to check the fuel level and refill the tank with gasoline.

Inspecting the steering handlebar for damage, looseness, and free rotation.

Procedure for checking the coolant level in the reserve tank.

Checking the brake fluid level and inspecting brake shoes for wear.

Adjusting the free play of the brake levers for optimal performance.

How to check the horn, headlights, taillights, and turn signals.

Checking the condition of the front and rear shock absorbers.

Verifying the effectiveness of the front and rear brakes.

Adjusting rearview mirrors for optimal visibility.

Inspecting the license plate for dirt and damage.

Checking reflectors for dirt and damage.

Ensuring previously identified faulty parts have been repaired.

Visually checking lubrication points for proper lubrication.

Steps to turn the ignition switch to the ON position.

Applying the rear brake lever to connect power for starting.

Procedure for starting the engine using the electric starter button.

Instructions for starting the engine using the kick starter lever.

Refers to starting methods and cautions after engine start.

How to disengage the main stand after starting the engine.

Guidelines for sitting correctly on the motorcycle for safe riding.

How to smoothly accelerate using the throttle grip.

General rules for safe riding, signaling, and lane positioning.

How to control speed using the throttle grip, including ascending roads.

Recommendations for new motorcycles and avoiding overheating for engine life.

Best practices for applying brakes, emphasizing gradual application.

Warnings against sudden stops and sharp turns, especially in rain.

Specific precautions for riding in wet conditions, including braking distance.

How to safely approach and stop the motorcycle near parking areas.

Steps to take once the motorcycle has come to a complete stop, including turning off the engine.

Instructions for parking the motorcycle on its main stand on level ground.

Locking the steering handlebar after parking to prevent theft.

Procedures for inspecting, cleaning, and replacing the air cleaner element.

Inspecting the fuel system for leaks and checking fuel tube connectors.

Tips for cleaning the motorcycle's exterior and waxing.

Information on the maintenance-free battery, cleaning terminals, and charging.

How to check for and replace blown fuses.

Checking and refilling the transmission gear oil.

How to inspect, clean, and replace the spark plug.

Checking and refilling the brake fluid level.

Checking rubber covers on wires and cables for proper installation.

Procedure for refilling the engine coolant.

Steps for draining and refilling the engine coolant.

Troubleshooting steps for engine starting or stopping issues.

Advice on what to do in case of a breakdown, recommending a service center.