Safety information
Danger due to unintentional movement!
• Always turn the scooter off using the keyswitch if you:
-
want to get
on
or
off
-
intend to stop for
long
periods
-
are
putting the scooter
a
way.
1.5 Safety during transport, assembly and maintenance
If the scooter is transported in the vehicle when fully
assembled:
- no persons may sit on the scooter during loading!
- no persons may sit on the scooter during transport!
Clamping and crushing hazard!
Increased hazards due to clamping or crushing result due to the
high component weight (such as batteries) during preparation
for transport and maintenance work.
• Always
carry
out
any
work
to be done with great care.
• Always try to get
help
from a second person, especially when
sto
wing
par
ts f
or
tr
anspor
t.
• Only
carry
out
any
work
described
if you are used to working
with the tools required.
• Only
carry
out
work
using
suitable tools.
Injury hazard due to improper assembl
!
• Ensure that
all
components in the Scooter have been
correctly assembled.
• After
assembly
,
check
that all locking devices are holding
correctly.
Accident hazard
ue to incorrectly
lted
nnecti
ns!
• If bolted connections
have
self-locking nuts, ensure
that these
are
replaced
when
reassembling.
•
Do
not
replace
self-locking nuts with normal nuts.
• If bolted connections
have
lock washers, check lock
washers
when
reassemb
ling and replace if necessary.
11
To Next Page
Loading...
Need help?
General