djusting
the seat height
20
The seat height (h) is adjusted using the
five holes (1-5) in the seat support.
Pull the seat support (6) out as far as
the required height until the correct
hole (1-5) appears in the seat tube
hole (7).
Push the clamping bolts (8) into the
seat tube from the front.
h
holes
In order to avoid danger
when driving. Please
adjust the height of seat,
and then confirm if the
seat’s bolt is at the right
position, otherwise, the
seat would be shaked.
To Next Page
Loading...
Need help?
General