KYMCO Venox 250i User Manual

1. GENERAL INFORMATION
1-3
VENOX250/250i
SERVICE PRECAUTIONS
 Make sure to install new gaskets, O-rings,
circlips, cotter pins, etc. when reassembling.
 When tightening bolts or nuts, begin with
larger-diameter to smaller ones at several
times, and tighten to the specified torque
diagonally.
 Use genuine parts and lubricants.
 When servicing the motorcycle, be sure to
use special tools for removal and
installation.
 After disassembly, clean removed parts.
Lubricate sliding surfaces with engine oil
before reassembly.

KYMCO Venox 250i Specifications

General

Displacement	249.4 cc
Starting System	Electric
Transmission	5-Speed
Final Drive	Chain
Frame	Steel
Front Suspension	Telescopic Fork
Rear Suspension	Dual Shocks
Width	800 mm
Ground Clearance	150 mm
Cooling System	Liquid Cooled
Fuel System	Fuel Injection
Front Brake	Disc
Rear Brake	Disc
Height	1100 mm