18/35
Safety Precautions
A strong magnet nearby may cause malfunction.
Display may be difficult to view in bright conditions (outdoors, under fluorescent lighting, etc.).
This is not a defect or malfunction.
If not using AC Charger, unplug from outlet.
Do not wrap cable of AC Charger around plug. May cause electric shock, ignition, or fire.
USIM Card remains the property of SoftBank Corp. If lost or damaged, it is replaced at cost. If it
seems to be malfunctioning or if lost/stolen, visit a SoftBank Shop or contact Customer Service.
Take old USIM Card (after subscription cancelation, etc.) to a SoftBank Shop.
Do not use excessive force to insert/remove USIM Card.
Malfunction due to inserting USIM Card in another IC Card reader/writer, etc. is at your own risk.
Keep IC (metal) portion clean for use.
Do not adhere labels, etc. on USIM Card.
Do not disassemble or modify USIM Card. May cause content to be erased or malfunction.
Install SD Card correctly. SD Card can only be used if installed correctly.
Touchscreen
Operate Touchscreen with fingers for touch operation. Do not operate with a pen, pencil, or other
pointed object. In addition to not operating correctly, it may scratch or damage Display.
Touch screen may not operate or may misoperate in the following instances.
・Stickers or commercially-available sheets are adhered to Display
・Display is soiled
・Operation with fingernails
If carrying in pocket or bag, metal or other conductive objects that are close to Touchscreen may
cause it to misoperate.
While touch operation is possible while wearing gloves when Glove touch mode is set to Always
ON or Auto, glove thickness/material may prevent optimal operation.
Touchscreen may not operate properly if gloves have any water on them. Wipe away water.
Touchscreen may not operate properly if glove fingers do not fit. Use pads of fingers to operate.
It is recommended that Glove touch mode be set to Always OFF when not wearing gloves or
before using handset where Display will be exposed to wetting.
If touch operations with both gloved finger and bare finger are done at the same time, handset
will prioritize operation with bare finger.
Touch operation with gloved finger may be invalid after that with bare finger. In such case, first
Press Power Key to turn Display off then back on again. If Glove touch mode is set to Always ON,
touch operation with gloved finger is possible after that with bare finger.
If handset initiates operation even when the touch panel (Display) is not touched, or if handset
does not respond to touch operation, first Press Power Key to turn Display off then back on again.
To Next Page