EasyManua.ls Logo

Kyocera DIGNO BX2 - When Using a Foam Type Hand Soap;Body Soap

Kyocera DIGNO BX2
316 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32/35
Safety Precautions
Do not mix different types of form type hand soaps/body soaps.
Do not use a hand soap for kitchen, for business use, additive-free, or alkaline, a
body soap for business use, additive-free, or alkaline, a solid soap, detergent, bath
salt, shampoo, conditioner, facial cleanser, make-up remover, or toothpaste, etc. If
one of these above is attached to the product, wash it with running water immediately.
The product performance is confirmed under the test environment. SoftBank Corp.
does not guarantee that nothing wrong occurs to the product.
When Using a Foam Type Hand Soap/Body Soap
Remove the cables from handset completely and turn it off
Apply a foam type hand soap/body soap to a soft cloth and wipe handset quickly with it
Be careful not to let the foam type hand soap, etc. come into hole of Mic, Earpiece/Speaker, or
External Device Port, etc.
Rinse handset until foams are removed completely
Rinse with somewhat low water pressure (6 L or less per minute, between 5˚C - 30˚C).
Wash the holes of Mic, Earpiece/Speaker, or External Device Port, etc. for approximately 30
seconds with running water.
As remaining foams may cause malfunction, rinse handset well until foams are removed
completely.

Table of Contents

Related product manuals