10-19
Troubleshooting > Troubleshooting
K
L
M
Message Checkpoints Corrective Actions
Reference
Page
KPDL error. Job is
canceled.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear
(page 8-32)
― PostScript error has occurred. The
job is canceled. Select [OK].
―
Message Checkpoints Corrective Actions
Reference
Page
Load paper in cassette #.
↑↓
(Displayed alternately)
Press OK to continue
using cassette #.
Is the indicated cassette out of
paper?
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
page 3-4
Load paper in cassette #.
↑↓
(Displayed alternately)
Set selected size paper
and press [OK].
Is the indicated cassette out of
paper?
Load paper.
Select [Paper] to select the other
paper source.
page 3-4
Load paper in MP tray.
↑↓
(Displayed alternately)
Press OK to continue
using MP tray.
Is the paper of the selected size
loaded in the multi purpose tray?
Load paper.
Select [Paper] to select the other
paper source. Select the [OK] key
to print on the paper in the currently
selected paper source.
page 3-8
Load paper in MP tray.
↑↓
(Displayed alternately)
Set selected size paper
and press [OK].
Is the paper of the selected size
loaded in the multi purpose tray?
Load paper.
Select [Paper] to select the other
paper source.
page 3-8
Message Checkpoints Corrective Actions
Reference
Page
Machine failure. Call
service.
― An error has occurred in the
machine. Make a note of the error
code displayed on the message
display, and contact your service
representative.
―
Maximum number of
scanned pages. Job is
canceled.
Is the acceptable scanning count
exceeded?
Cannot scan pages any more. Job is
canceled.
Select [OK].
—
To Next Page
Loading...
