10-22
Troubleshooting > Troubleshooting
S
Replace MK. — Replacement of the parts in the
maintenance kit is necessary at
every 300,000 pages of printing and
requires professional servicing.
Contact your Service
Representative.
—
Replace the toner. ― Replace the toner container to our
specified toner container.
page 10-5
Restricted by Job
Accounting.
Cannot print.
— This job is canceled because it is
restricted by Job Accounting. Select
[OK].
—
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear
(page 8-32)
Message Checkpoints Corrective Actions
Reference
Page
Scanner memory is full.
Job is canceled.
— Scanning cannot be performed any
more due to insufficient memory.
The job is canceled. Select [OK].
—
Send Error.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-32)
— An error has occurred during
transmission. The job is canceled.
Select [OK].
Refer to Responding to Send Error
for the error code and corrective
actions.
page 10-24
Shake the toner
container.
— Shake the toner container well and
reinstall it.
page 10-5
SSD error. Job is
canceled.
— An error has occurred on SSD. Job
is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
—
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
