Kyocera ECOSYS P2035d

5-10 Troubleshooting
Error Indication
If the indicators light or flash repeatedly in manners not described
above for normal or maintenance indication, a service error has
probably occurred. Press the power switch to turn the machine off,
wait 5 seconds and then turn the printer on again. This may clear the
error. Even if the error is not cleared, contact your service technician.
Specified file not found. Press [GO] to continue processing.
Press [Cancel] to cancel processing.
The current printing cannot be
continued.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Unable to print due to insufficient
memory.
Install the expansion memory in the
printer. Press [GO] to continue
processing. Press [Cancel] to cancel
processing.
Unable to print as the data is too
complicated.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Indicator Meaning Remedy