Kyocera ECOSYS P2040dn

6-16
Setup and Registration (System Menu) > System Menu
ThinPrint over SSL To use the Thin Print over SSL protocol, set [ThinPrint Over SSL] to [On].
*2, *3
Value: Off, On
NOTE
• This function is displayed when [ThinPrint] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [ThinPrint over SSL] is set to [On].
Wi-Fi
*1
Wired Network
WSD-PRINT Set whether to use our proprietary web services.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [WSD-PRINT] is set to [On].
Wi-Fi
*1
Wired Network
Enhanced_WSD Set whether to use our proprietary web services.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Enhanced_WSD] is set to [On].
Wi-Fi
*1
Wired Network
EnhancedWSD(SSL) Set whether to use our proprietary web services over SSL.
*2, *3
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [EnhancedWSD(SSL)] is set to [On].
Wi-Fi
*1
Wired Network
*1 Displayed only when wireless network function is available on the machine.
*2 The setting will be changed after restarting the device or network.
*3 Set [SSL Server] to [On] in Network Settings.
SSL Server (page 6-13)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description