6-46 Using the Operation Panel
Job Name (The Job Name display settings)
Set whether the job name set in the printer driver is displayed.
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Job Name appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or to display the job name to be used.
Off (Use the job name set in the printer driver.)
Job Name
Job No.+Job Name
Job Name+Job No.
5
When the desired color mode is displayed, press [OK]. Color mode
is changed.
6
Press [MENU]. The display returns to Ready.
To Next Page
Loading...
