EasyManuals Logo

Kyocera ECOSYS P6030cdn User Manual

Kyocera ECOSYS P6030cdn
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Using the Operation Panel 6-47
Network (Network settings)
This printer supports TCP/IP and TCP/IP (IPv6) protocols.
IP is an abbreviation for Internet Protocol. This printer routinely uses the
TCP/IP (IPv4) protocol, but provides a separate setting for the next-
generation IP, IPv6.
TCP/IP (IPv4) uses 32-bit IP addresses, but the rapid growth in the
number of Internet users has resulted in a shortage of IP addresses. IPv6
was developed to expand the range of available IP addresses by using
128-bit IP addresses.
The options available in the Network settings are as follows:
TCP/IP (IPv4 settings)
TCP/IP (IPv6) (IPv6 settings)
Protocol Detail (Detailed settings for the network protocol)
Restart Network (Restarting the network card)
1
Press [MENU].
2
Press or repeatedly until Network > appears.
TCP/IP (IPv4 settings)
This selects the settings for TCP/IP (IPv4).
The TCP/IP system refers to the Internet system, which has a 5-layer
structure consisting of the interface layer, link layer, network (IP) layer,
transport (TCP/UDP) layer and application layer.
The interface layer is a key layer in the TCP/IP system that provides an
abstracted interface that is not dependent on the link (communication
line: frame relay or Ethernet, etc.) to the IP module (IP layer). This means
that the IP module can use this abstracted interface (which is not
dependent on the link type) to exchange IP packets back and forth with
the link layer.
The options available in the TCP/IP (IPv4) settings are as follows:
DHCP (DHCP setting)
Auto-IP (Auto-IP setting)
IP Address (IP address setting)
Subnet Mask (Subnet mask setting)
Gateway (Gateway setting)
Bonjour (Bonjour setting)
IMPORTANT The DHCP, IP address, subnet mask, gateway and
Bonjour menu options for TCP/IP are displayed when TCP/IP is en-
abled.
Note
Check with your network administrator when selecting the
network setting. After all network related settings have been
done, restart the network. Refer to Restart Network (Restarting
the network card) on page 6-55. This is mandatory to make the
settings effective!
When Command Center RX is used, network parameters and
security settings can be conveniently changed and checked from
your PC. For more information, refer to the Command Center RX
User Guide.
Network >

Table of Contents

Other manuals for Kyocera ECOSYS P6030cdn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS P6030cdn and is the answer not in the manual?

Kyocera ECOSYS P6030cdn Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution600 x 600 DPI
Duplex printing modeAuto
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle100000 pages per month
Number of print cartridges4
Page description languagesMicrosoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Paper input typeCassette, Paper tray
Total input capacity650 sheets
Total output capacity- sheets
Maximum input capacity2150 sheets
Total number of input trays2
Maximum number of input trays5
Multi-Purpose tray input capacity150 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length138 - 356 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-FiNo
Mobile printing technologies-
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
Processor model465S
Processor familyPowerPC
Maximum internal memory1536 MB
Sound power level (standby)34.4 dB
Sound pressure level (printing)52.5 dB
DisplayLCD
CertificationTÜV/GS, CE
Product colorBlack, White
Display number of lines2 lines
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0 W
Power consumption (standby)76 W
Power consumption (printing)529 W
Power consumption (PowerSave)4 W
Mac operating systems supportedMac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificatesBlue Angel, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth518 mm
Width345 mm
Height480 mm

Related product manuals