8-3
Setup and Registration (System Menu) > Operation Method
Menu Settings
This section explains the functions that can be configured in Menu. To configure the settings, select the item in
System Menu and select the setting item. For details on each function, see the table below.
Item Description Reference
Page
Report Configure settings for printing reports and histories. page 8-5
Counter This counts the number of pages printed. page 2-40
User Property You can view and change information about the logged-in user. page 8-7
Paper Settings Configure settings for paper. page 8-7
Print Settings Configure settings for printing. page 8-11
Network Configures network settings. page 8-15
Primary Network Specify the network to be used for the send function, the network
authentication and connecting to external address book.
page 8-15
Optional Network Configure settings for the optional Network Interface Kit or Wireless
Network Interface Kit.
page 8-28
Language Select the language displayed on the message display. page 8-31
Def. Screen(Box)
Select the screen to be displayed when [
Document Box
] key is selected.
page 8-31
Date Setting Configure settings related to the date and time. page 8-31
Buzzer Set options for buzzer sound during the machine operations. page 8-32
RAM Disk Setting A RAM disk can be created and its size can be set. page 8-32
Format SSD Format an optional SSD. page 8-32
Format SD Card Format an optional SD/SDHC memory card. page 8-33
Display Bright. Set the brightness of the message display. page 8-33
Disp. Backlight Set the backlight of the message display. page 8-33
Error Handling
Select whether to cancel or continue the job when error has occurred.
page 8-33
Timer Setting Configure settings related to the time. page 8-34
Disp. Status/Log Set the display method of the Status/Log. page 8-36
Keyboard Type Select the type of keyboard that you want to use. page 8-36
Bluetooth Set. Set the Bluetooth keyboard. page 8-36
Low Toner Alert Set the amount of remaining toner to notify the administrator when
to order a toner when the toner is running low.
page 8-36
Msg Banner Print Set whether the confirmation screen appears before each sheet is
printed when printing multiple banner sheets.
page 8-37
Remote Printing Select whether to prohibit printing that is performed without
operating the machine.
page 8-37
Direct PRN (Web) Set whether to allow Direct Printing from Command Center RX. page 8-37
MaintenanceAlert Set whether or not to display on the operation panel when a periodic
inspection is near.
page 8-37
Security
The security functions can be set up to protect printer operation and the print data.
page 8-38
I/F Block Set. This allows you to protect this machine by blocking the interface with
external devices such as USB hosts or optional interfaces.
page 8-39
To Next Page
Loading...
Need help?
General
