1. Switch on the printer's power. The message display should indicate 6HOIýWHVW. When the printer is first switched on after installation, there will be a
delay of several minutes (approx. 6 to 7 minutes) before the printer gets ready to print. During this period, the message display shows 3OHDVHýZDLW. 2.
Wait until the ON LINE indicator is also lit and the message display indicates 5HDG\. 3. Press the STATUS key. The printer should print a page listing the
positions of margins, memory allocation, and other information. A sample status printout is shown in Chapter 2.
11--Test the interface with the computer Test that the printer and computer are correctly connected. If you have connected the printer and computer with a
parallel interface cable, follow the procedure below. 1. Check that the printer's message display indicatesý5HDG\ and that the ON LINE indicator is ON. 2.
Boot the computer in DOS mode, or set the computer to DOS (prompt) mode. 3. At the DOS prompt, type the following. ECHO !R! STAT; EXIT;]PRN If the
printer prints a status page, the computer and printer are connected correctly. For details on the status page, refer to Chapter 2. If you do not get this result,
check that the cable is securely plugged in at both ends, and repeat the test. If you still do not get the right result, you may have a defective or improperly-
wired cable. Try using a different cable. 12--Set the emulation mode The printer emulates the operation of five other printers. It is factory-set to emulate the
PCL 6 at power-up.
If you primarily use software that supports PCL 6, or that supports the Kyocera printer itself, the factory setting is the one you want. If you primarily use
software that supports another printer, it is convenient to change the printer's power-up emulation mode. The emulation mode can be changed from the
printer control panel. To change the emulation mode, refer to the Mode Select Menu diagram on the last page of this manual. 1-15 1.4. Setting Up and
Interfacing 13--Install the printer driver Printer drivers are provided for using the printer with Windows 95, Windows 98, or Windows 3.1. Use the Kyocera
Digital Library CD-ROM supplied with the printer. To install the printer driver, proceed as follows.
Reference to the Windows manual is also recommended. Windows 95/Windows 98 The automatic installation screen appears when the CD-ROM for the
printer is inserted into the computer, if the computer is set for CD auto-run. Proceed with the installation according to the instructions that appear on the
screen. Read the explanation below for information about the main screens during installation. Select FS-3750 or FS-1750 from this screen.
The types of drivers are shown below. Select the driver that you need. (When you click an explanation appears below the box. Depending on the computer,
installation screens may not appear. If this happens, install the printer driver according to the procedure below.
1-16 1.4. Setting Up and Interfacing 1. Insert the supplied CD-ROM (Kyocera Digital Library) into the CD-ROM drive of the computer. 2. Click on Start with
the mouse on the Windows95/98 Task Bar, and align the cursor with Settings. Click on Printers among the items displayed. Start button Windows 95 Windows
98 3. The printer folder will open. Double click on Add printer.
Windows 95 Windows 98 4. The Printer Wizard screen will appear. Click on Next ]. 5. A screen for selecting the printer to be connected will appear. Select
the most appropriate printer and click on Next. 6. Next, Click the manufacturer and model of your printer screen will appear. At this point, select Have Disk .
located at the lower right.
(See the figure for Step 7.) 7. A screen for installing from floppy disk will appear. Copy manufacture's files from inside the box, or input one of the following
directories: (Standard PCL5E driver) [CD-ROM Drive Name]:\drivers\[Language]\pcl\9x (Standard PCLXL driver) [CD-ROM Drive
Name]:\drivers\[Language]\pcl\9x\enhanced 1-17 1.
You're reading an excerpt. Click here to read official KYOCERA
FS-1750 user guide
http://somemanuals.com/dref/324820
To Next Page
Loading...
