1. Press the MODE key. Then use + or keys to display 3DSHUýKDQGOLQJýýý!. 2. Press the (Form Feed) key to display !03ýWUD\ýPRGH.
3. After pressing the ENTER key, the mode display is changed by pressing the + and keys. Display )LUVW and then press the ENTER key. !03 WUD\ )LUVW
PRGH 4. Press the EXIT key. The printer will not switch to light the MP tray indicator while the paper is fed manually using the automatic manual feeding
mode. 1-20 1.5. MP (Multi-Purpose) Tray Feeding Cassette Mode 1. Press the MODE key to display 3DSHUýKDQGOLQJýýý!.
2. Press the (Form Feed) key to display !03ýWUD\ýPRGH. 3. After pressing the ENTER key, the mode display is changed by pressing the + and keys.
Display &DVVHWWH and then press the ENTER key.
!03 WUD\ PRGH &DVVHWWH 4. Press the EXIT key. 5. Insert the paper so that it is aligned straight in the tray. About 100 sheets (0.
1 mm thickness) can be inserted at one time. 5HDG\ appears on the message display. Protector Bar 6. Carefully lower the protector bar, and the paper will
be correctly set in the MP tray. Feeding Envelopes Envelopes should be fed face up, right side first, as shown below. From the MODE SELECT menu, set the
printer to print in landscape page orientation. To avoid trouble, we recommend that envelopes are delivered face-up. Use the STACK key on the printer
control panel to select the face-up tray. Not all envelopes print well. See Appendix B for details on suitable types of envelopes.
See page 2-3 for the envelope sizes that can be set. Envelope 1-21 1.6. Memory Card 1.6. Memory Card A memory card is a microchip card containing, for
example, nonresident fonts and/or macros, forms, etc. The printer reads the contents of the card into its internal memory when power is switched on. The
presence of this data in the printer memory can be confirmed on the status printout. The maximum card capacity that can be used is 32 Megabytes. The type of
the memory card to be used must be of either flash memory card (+5V type) or SRAM-type and conform to the PCMCIA 2.
1 (JEIDA 4.2) standards. Please use a memory card recommended by Kyocera. The memory card slot is located at the bottom right of the printer. To insert
and use a memory card: 1.
Switch printer power off. Do not insert or remove a memory card while power is on. If the memory card is removed while the printer is on, damage could
result in the printer's electronics or the memory card. 2. Insert the memory card in the slot.
Insert it face up, connector end first. Push it in all the way. Memory Card Slot [PC CARD (MEMORY)] Memory Card 3. Switch printer power on. The printer
reads the contents of the memory card during its power-up sequence. The information (nonresident fonts, etc.) on the memory card is now available for use. If
the memory card information is deleted from the printer's memory during the printing process, it can be reread by using the mode selection function explained
on the last page in this manual. To Remove the Memory Card: 1. Switch the power off.
2. Remove the memory card from the slot. Handling a Memory Card A memory card contains sensitive electronic circuits. Treat them with appropriate care. Ì
A memory card is sensitive to electrostatic discharge. Please discharge yourself before touching a memory card. Ì Never attempt to force a memory card into
its slot. Ì Never bend a memory card. Ì Avoid impact. Do not drop a memory card.
Ì Do not touch the terminals of the memory card. Ì Do not spill water or other liquids on a memory card. Ì Keep a memory card away from naked flames and
other sources of heat. Ì Do not leave a memory card lying in direct sunlight. For details regarding the use of the memory card, refer to 2.
6. Operating a Memory Card in this manual. 1-22 1.7. Memory Expansion Installation 1.
7. Memory Expansion Installation In this section is explained how to expand the printer's memory. Expanded printer memory enables you to print more
complex pages, download more fonts, and define more macros.
You're reading an excerpt. Click here to read official KYOCERA
FS-1750 user guide
http://somemanuals.com/dref/324820
To Next Page
Loading...
