A different paper type setting can be made for each paper source including the multipurpose tray. Not only can preset paper types be selected, but it is also
possible for the user to define and select customized paper types.
The following types of paper can be set. For details on paper, please see Appendix B. Cassette, Media Type and Custom Settings Paper feed source Paper
Type 3ODLQ 7UDQVSDUHQF\ 3UHSULQWHG /DEHOV %RQG 5HF\FOHG 9HOOXP 5RXJK /HWWHUKHDG &RORU 3UHSXQFKHG (QYHORSH
&DUGVWRFN &XVWRPý ú* MP tray Bulk feeder O O O O O O O O O O O O O O Cassette O × O × O O × O O O O × × O EF (Envelope feeder) O × O
O O O × O O O O O O O Duplex path (MP tray available only in Cassette mode) O × O × O O × O O O O × × O O: Can be stored ×: Cannot be stored *:
This is a paper type defined and registered by the user. Up to eight types of user settings may be defined. A number fromýì toýå is used in place of the #.
For details on setting user types, please see page 2-20. 2-19 2.8. Setting the Paper Type Making Settings The following describes the procedure for setting the
paper type using the Recycled type and Cassette as examples. 1.
Displayý3DSHUýKDQGOLQJý! on the printer's Mode Select Menu and press the + and keys to display theý&DVVHWWHýW\SH. key. Then use the
3DSHUý KDQGOLQJý ! !&DVVHWWHý W\SH ý ý 3ODLQ 2. Pressing the ENTER key will cause aý" to flash. Press the + and keys to displayý5HF\FOHG.
!&DVVHWWHý W\SH "ý 5HF\FOHG Press the CANCEL key if you want to cancel the setting. Theý" display will disappear. 3. Pressing the ENTER key will
cause theý" to disappear. Pressing the EXIT key will exit the setting.
The same procedure can be used to set the paper type for other paper sources. Paper Type User Setting The following describes the procedure used to set a
user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the
paper type for a paper source. 1. Displayý3DSHUýKDQGOLQJý! on the printer's Mode Select Menu and press the + and keys to displayý!7\SHýDGMXVW.
key. Then use the 3DSHUý KDQGOLQJý ! !7\SHý DGMXVWý ý ý ! ý ý &XVWRPý ú 2. Pressing the ENTER key will cause aý" to be displayed. Press the +
and keys to select the paper type (see page 2-19) that you want to customize and then press the ENTER key.
!7\SHý DGMXVW "ý &XVWRPý ú Note that if you change the setting for a paper type other thaný&XVWRPýì throughýå the paper type setting for each paper
source set to that paper type will be changed. 2-20 2.8. Setting the Paper Type 3. Press the key after selecting the paper type you want to customize.
Pressing the + and keys will cycle through a display of the submenus given in the table below. Submenus displayed !!3DSHUý ZHLJKW !!'XSOH[ý SDWK
(only when the paper type is &XVWRPý ú) Selection parameters 1RUPDOý (default) +HDY\ý õ7KLFNô (QDEOHý (default) 'LVDEOH Description Sets the
paper thickness Selects duplex printing on/off when an optional duplexer is installed (setting active only for the selected paper type) Display the submenu to
be set and press the ENTER key. Aý" will flash. Press the + and keys to select the desired parameter. !!3DSHUý ZHLJKW "ý 1RUPDO (Example: Setup
menu for Paper weight) Press the CANCEL key if you want to cancel the setting.
Theý" will disappear. 4. Pressing the ENTER key will cause theý" to disappear. Pressing the EXIT key will exit the setting. The same procedure can be used to
set the parameters on other submenus. Note that the setting status for paper weight and fuser mode used for each paper type is as given in the table below. In
addition, all paper type settings made usingý7\SHýDGMXVW can be reset to the default values shown in the table below using
theý!5HVHWýW\SHýDGMXVW menu. Paper Type Plain Normal Paper weight Heavy (Thick) TransPreLabels** parency* printed Bond Recycled Vellum*
Rough** LetterPreEnveColor** head punched lope** Card Custom stock** O × × O O × O × O × O × O × O × O × O × O × O × × O O × *: **: These
cannot be selected when the paper source is EF-1.
You're reading an excerpt. Click here to read official KYOCERA
FS-1750 user guide
http://somemanuals.com/dref/324820
To Next Page
Loading...
