Kyocera FS-C5025N - Page 40

2HJ/2JK
1-3-6
Service items Description
No. Items Description
 Color print counter -
 Maintenance kit counter -
 Optional unit software version /Paper feeder1/Paper feeder 2/Paper feeder 3/Envelope feeder/Duplexer
 Drum ID /Black/Cyan/ Magenta/Yellow/
 LED print head compensation
value
-
 Developer refreshing mode
counter
/Black/Cyan/Magenta/Yellow/
 Optional paper feeder/bulk
stacker installation
First 2 bytes
Bit 0: MPF
Bit 1 to 6: Paper feeder 1 to 6
Bit 7: Duplexer
Bit 8: Reserved
Bit 9: Envelope feeder
Bit 10 to 15: Reserved
Second 2 bytes
Bit 0: Face-up
Bit 1: Face-down
Bit 2 to 15: Reserved
 Operation panel message lan-
guage
PMSG command setting (decimal)
 Current temperature -
 Current humidity -
 MAC address -
 Fixed asset number -
 Media type attributes Media type setting value from 1 to 28 (paper weight)
(unused media type are always 0x00.)
 Memory SPD information (slot 1) -
 Calibration information 1 (CT01) /Average background S-wave/Average background P-wave/
Dark potential S-wave/Dark potential P-wave/
 Calibration information 2 (CT02
to CT09)
[I/O output data information]
Each 2 bytes in the following order:
/99.6%/95%/85%/70%/55%/40%/27%/15%/
CT02: /S-wave background Magenta/P-wave background Magenta/
CT03: /S-wave background Cyan/ P-wave background Cyan/
CT04: /S-wave background Yellow/ P-wave background Yellow/
CT05: /S-wave background Black/ P-wave background Black/
CT06: /S-wave patch Magenta/ P-wave patch Magenta/
CT07: /S-wave patch Cyan/ P-wave patch Cyan/
CT08: /S-wave patch Yellow/ P-wave patch Yellow/
CT09: /S-wave patch Black/ P-wave patch Black/