2HJ/2JK-1
1-3-15
Setting the paper feed operation (printer driver priority mode)
Description
With printer driver priority mode, when selecting the specific paper feed location (a cassette
or MP tray) with the printer driver (it is not automatic selection), paper is fed from the
selected location. Message [Add Paper] is displayed when there is no paper in that location.
When selecting the MP tray as the paper feed location, paper is fed with the timing of maxi-
mum size (A4). As for the setting media type (setting the paper type), setting of the printer
driver is notified to the engine controller PWB. Duplex printing operation is still the ordinary
operation, and paper jam occurs if paper size is different from the setting of the printer.
Purpose
To set the printer driver priority mode which priority is given to the setup of a printer driver
when the ordinary paper feed operation mode is not suitable for the usage condition of the
user.
Method
1. Enter the service mode [>>Paper feed].
2. Press the OK key. Message [Paper feed?] will be displayed.
3. Select the mode (Special? or Normal?) pressing the T key or S key.
4. Press the OK key.
Completion
Counter reset for the maintenance kit (20/22 ppm printer [EUR/USA model] only)
Description
The "Install MK" message means that maintenance kit should be replaced at 200,000
images of printing. The interval counter must be manually reset using this service item.
Maintenance kit* includes the following units:
*: 20/22 ppm printer [EUR/USA model] only
Service items Description
>>Paper feed
Special
Special Ordinary paper feed operation mode (Default)
Normal Printer driver priority mode
>>Maintenance
Maintenance kit
Item For EUR model For USA model
Maintenance kit MK-540 MK-542
Drum units × 4 DK-521
Black developer unit DV-510K DV-512K
Yellow developer unit DV-510Y DV-512Y
Magenta developer unit DV-510M DV-512M
Cyan developer unit DV-510C DV-512C
Primary transfer set
(Primary transfer unit and pri-
mary transfer cleaning unit)
TR-521
Paper feed unit FE-510
Fuser unit FK-521
Ozone filters × 2 [Part No.: 2D902530]
Feed rollers set Retard roller: [Part No.: 5AAVROLL+052]
MP tray feed roller: [Part No.: 5AAVROLL+051]
To Next Page
Loading...
