13
English
0=Select next side (same as with a form feed)
1=Select front side (printing of the ensuing page begins on the
front side of the next sheet, regardless of whether the current
page was printed on the front or back side of the current sheet)
2=Select back side (printing of the ensuing page begins on the
back side of the current sheet if the current page was printed on
the front side, or on the back side of the next sheet if the
current page was printed on the back side)
Example
The following example selects the duplex mode with short-edge binding, selects
to portrait page orientation, and prints text on both sides of the page. The result is
as shown in Figure 10.
!R! CMNT Initiates a PRESCRIBE command sequence;
RES; CMNT Causes a page break and resets parameters;
DUPX 2; CMNT Selects duplex mode, short-edge binding;
SPO P; CMNT Selects portrait orientation;
STAK 1; CMNT Select face-down delivery; EXIT;
This text prints rightside-up on the front side
of the page.
!R! DXPG 0; CMNT Ends current page (front side of the
paper); EXIT;
This text prints upside-down on the reverse side
of the page.
!R! RES; EXIT;
To Next Page
Loading...
