Kyocera KM-C2520 User Manual

Select the paper source for copying different sizes and types of paper.

Specify the size of originals for accurate scanning and copying.

Set the number of sheets to copy, up to 999 for a single job.

Adjust the sharpness of image outlines for clearer copies.

Adjust hue by modifying cyan, magenta, yellow, and black strengths.

Adjust the color (hue) of images for creative copies.

Adjust images for more vivid or dull results using preset options.

Scan originals in separate steps and combine them into one copy job.

Store documents on the machine's hard disk for later printing.

Store scanned originals for printing later, combining up to ten documents.

Manage multiple copy, print, and fax jobs in the job queue.

Print a status page to check current settings, memory, and installed options.

Configure parallel, USB, and network interfaces for data transfer.

Select default fonts, width, size, and pitch for printing.

Configure MP Tray mode, feed select, duplex mode, and output select.

Enable advanced printing like Quick Copy, Private Print, and Virtual Mailbox.

Configure scanner functions like destination, resolution, file type, and image quality.

Change default settings for image scanning modes and file types.

Register up to 5 destination/mode combinations for quick scanning.

Review transmission history of scanned data from the operation panel.

Manage scanner settings remotely via a web browser for network configuration.

Configure network interface settings, administrator password, and system defaults.

Register destination PCs for sending scanned image data.

Configure basic e-mail settings and destination addresses for sending scanned images.

Configure settings for transferring scanned files to FTP servers.

Utility to receive images from scanner and save them to specified folders on a computer.

Tool for registering/modifying addresses in the scanner Address Book.

Address book installed on computer for users to create custom destination lists.

Utility to import scanned images into TWAIN-compliant applications.

Adds keywords to scanned images or creates CSV files for database management.

Change default settings applied on power-up or reset for copying and machine defaults.

Adjust color and image quality settings like calibration and auto gray adjust.

Configure machine-wide defaults for paper handling, sleep timers, and other operations.

Set paper size and paper type for the MP tray.

Pre-register custom original sizes for selection in the original size menu.

Change the machine's management code for security and settings access.

Set the time until Auto Sleep mode is activated for power saving.

Set priority between printing speed and image quality for high density originals.

Explains how job accounting manages copy counts by department for business organizations.

Add, delete, and define restrictions for departments and copy counts.

Read overall usage or usage per department, and reset counters.

Turn job accounting on or off as necessary for copying, printing, and scanning.

Change default settings for copy, printer, scanner, and fax job accounting.

Enter department ID-codes for copying, printing, and scanning operations.

General guidelines and checkpoints for resolving common machine issues.

Procedures for addressing specific error messages displayed on the touch panel.

Basic paper specifications, usable paper types, and choosing appropriate paper.

Detailed specifications for copying performance, scanning, and hardware components.

Charts showing which copier and scanner functions can be used in combination.

Definitions of technical terms used throughout the manual.