Scanner Settings
4-2
Setting Scanner Functions
This section explains how to configure the scanner functions from the machine.
NOTE: Refer to each scanner function operation procedure as explained in Operation Guide for
information how to display the scanner function settings screen.
The available settings may vary depending on the sending method.
The following settings are available from the scanner function screen’s [Basic] tab.
• Selecting Original Size...4-3
• Select Sending Size...4-3
• Selecting Original Orientation...4-4
• Scan Resolution...4-4
• File Name Input...4-5
• File Type...4-5
Place the original and select destination.
Send
CancelScan to PC-Sending
Destination
Original
11×8½"
Addre ss
8½×11"
Select
Auto
Scanning
Basic
Quality Edit
Auto si ze
Select
Send Size
JPEG
File Type
Top Edge
Orig. Set
08/08/’05 14:00
Book
Orig.Size Direction
Resol uti o n
Ready to scan. ( )Full-Color
Cont. TX toRegi ste r Pr gr m
Auto
200dpi
File Name
Input
Save at
User PC
Delete
To Next Page
Loading...
Need help?
General
