IC Link for Windows
{PAGE }
Tools Menu
Multi-Part Form Creator (continued)
5. After all the pages have been configured and created in the Multi-Part Form Creator, click on the “Add to
project…” button. This will create two files called ccpy on.prn and ccpy off.prn which can be saved onto
the local PC and added into the IC Link Project File under the “Host-File forms” tab of IC Link.
6. The two files which will be created are the CCPY Enable (ccpy on.prn) and the CCPY Disable (ccpy
off.prn) files. A copy of each of these files can be saved onto the PC as shown in the figures below, and
will also be added to the IC Link Project file under the Host-File forms tab as *.prn files.
To Next Page
Loading...
Need help?
General
