(Page.1/5)
Service Bulletin Ref. No. 2R7-0031 (J030)
<Date> February 28, 2019
KYOCERA Document Solutions Inc.
For authorized KYOCERA engineers only.
Do not distribute to non-authorized parties.
DVD upgrade (설정기능 향상, etc.) (Except TA/OLIVETTI)
M5526cdw, M5526cdn, M5521cdw, M5521cdn, M5525cdn,
M5520cdw, M5520cdn, M5021cdn, P5026cdw, P5026cdn,
P5021cdw, P5021cdn, P5025cdn, P5020cdw, P5020cdn
At Set Up Next Periodic Maintenance
Next Visit/Service Call Information only
SC/Error Paper Feeding/Conveying Other
Image Machine operation
Hardware Firmware and Software Information
In order to improve setup capability, the following topics are improved
Improving the driver installer
1. Improve the display screen when the print device cannot be found
2. Make it possible to find the operation manual in the installer
3. Make it possible for the user to select whether to create the short cut of
the quick scan in the last screen of the installation (Currently, short cut
is created as a default automatically)
Improving the Quick Scan tool
1. Unify the Quick Scan tool screen and the detail setting screen
- Separate the basic setting and the advanced function in two tabs, and
set the detail setting by the advanced function
2. Add the Scan to Folder
3. Add the high compression PDF
4. Add the display informing the connect destination if TWAIN driver is not
installed
5. Add the short cut creation function of the custom profile
- Make it possible to select immediate execution or display the tool by
executing the shortcut
6. Add the setting function of the startup profile (Pinning function)
7. Add the slider together with the value at the setting of the file size and
the image quality
8. Change the profile icon design
9. It is possible to select settings partially for the operation of the default
profile to transmit matching the purpose
1. Change the design unifying the TWAIN screen
2. Make it possible to refer to the preview on the separate screen
<Refer to the following pages for the details>
Field Measure: No particular problems are expected
First implemented timing at factory: Plan from March 2019 production
To Next Page
Need help?
General
