EasyManua.ls Logo

Kyocera ECOSYS M2535dn - User Manual

Kyocera ECOSYS M2535dn
482 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATION GUIDE
q
PRINT
q
COPY
q
SCAN
ECOSYS M2030dn
ECOSYS M2035dn
q
PRINT
q
COPY
q
SCAN
q
FAX
ECOSYS M2530dn
ECOSYS M2535dn

Table of Contents

Other manuals for Kyocera ECOSYS M2535dn

Questions and Answers

  • U
    ureidSep 12, 2025
    How to resolve Kyocera ECOSYS M2535dn cannot duplex print?
    • U
      ualvarezSep 12, 2025
      If your Kyocera All in One Printer cannot duplex print, you may have selected a paper size/ media type that cannot be duplex printed. Select the available paper type. Press the OK key to print without using Duplex.
  • K
    Kiara MillerAug 25, 2025
    What to do if Kyocera ECOSYS M2535dn printouts are too light?
    • K
      Kaitlyn PatrickAug 25, 2025
      If your Kyocera All in One Printer's printouts are too light, consider the following: * If the machine is in Manual Density mode, select the correct density level. * Ensure the toner is distributed evenly within the toner container by shaking it from side to side several times. * If there's a message indicating the need for more toner, replace the toner container. * If the paper is damp, replace it with new paper. * If EcoPrint mode is enabled, disable it. * Also, verify that the paper type setting is correct for the paper being used.
  • C
    Charles KingAug 25, 2025
    What to do if Kyocera All in One Printer cannot print?
    • S
      Steven JohnsonAug 26, 2025
      If your Kyocera All in One Printer is not printing, check the following: * Ensure the machine is plugged into an AC outlet. * Verify the machine is powered on. * Make sure the printer cable is securely connected. * If the machine was powered on before connecting the printer cable, power it on again after connecting the cable. * If the print job is paused, press [Resume] to resume printing. * If an error message is displayed, follow the corresponding procedure.
  • L
    Lorraine Brown DDSSep 23, 2025
    Why Kyocera All in One Printer cannot use the remote switching function?
    • M
      mruizSep 23, 2025
      If your Kyocera All in One Printer cannot use the remote switching function, and you are using a pulse line, some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set. If the remote switching number is not correct, check the registration. (Default: 55)
  • T
    Tracy Aguilar PhDSep 13, 2025
    What to do if Kyocera All in One Printer cannot send via SMB?
    • D
      Douglas WhiteSep 13, 2025
      If your Kyocera All in One Printer cannot send via SMB, check the following: * Ensure the network cable is securely connected. * Verify that the network settings for the equipment have been configured properly, configuring the TCP/IP settings properly. * Check that the folder sharing settings have been configured properly, checking sharing settings and access privileges under the folder properties. * Confirm that the SMB protocol has been set to [On], setting the SMB protocol setting to [On].
  • M
    Melody SosaSep 18, 2025
    Why Kyocera ECOSYS M2535dn cannot perform memory forwarding?
    • W
      William CastroSep 18, 2025
      If your Kyocera All in One Printer cannot perform memory forwarding, check the memory forwarding setting to ensure it is set to [On].
  • C
    cameronjamesSep 6, 2025
    What does 'Job Accounting restriction exceeded. Cannot scan' mean on Kyocera ECOSYS M2535dn?
    • J
      Joshua JacksonSep 6, 2025
      If your Kyocera All in One Printer displays 'Job Accounting restriction exceeded. Cannot scan', press the OK key to cancel the job. Check the setting for Job Accounting.
  • A
    Ashley CookSep 6, 2025
    What to do if Kyocera ECOSYS M2535dn All in One Printer says 'The phone receiver is off the hook'?
    • S
      Susan RhodesSep 7, 2025
      If your Kyocera All in One Printer displays 'The phone receiver is off the hook. Hang Up', it means that the phone connected to the machine is off the hook. Hang up the handset.
  • V
    Vickie WagnerSep 23, 2025
    What to do if Kyocera ECOSYS M2535dn cannot output from a Sub Address Box?
    • C
      ccarrSep 23, 2025
      If your Kyocera All in One Printer cannot output from a Sub Address Box, enter the correct box password.
  • T
    Tammy WilliamsAug 30, 2025
    How to fix 'Add paper in cassette' error on Kyocera All in One Printer?
    • M
      Melanie MccormickAug 30, 2025
      If your Kyocera All in One Printer displays 'Add paper in cassette 1 (~3). or Add paper in MP tray.' message, it means the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If the type of printing paper is specified, the necessary paper types are also displayed. To use another paper source, select the paper source and press the OK key. Alternatively, press [Paper] (the Right Select key), select the desired paper source, and then press the OK key. It could also mean that the cassette for the specified paper type is not available. Press [Paper] (the Right Select key), select another paper source, and then press the OK key. It may also mean that the cassette is not securely loaded. Remove the cassette and reload it completely.

Kyocera ECOSYS M2535dn Specifications

General IconGeneral
Secure printingYes
Print technologyLaser
Maximum resolution1800 x 600 DPI
Duplex printing modeAuto
Time to first page (black, normal)7 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies999 copies
N-in-1 copy function (N=)2, 4
Time to first copy (black, normal)6.9 s
Scan toE-mail, FTP, SMB, USB
Scanner typeADF scanner
Grayscale levels256
Maximum scan areaLegal (216 x 356) mm
Scan speed (color)14 ppm
Image formats supportedJPG, TIF
Document formats supportedPDF, XPS
FaxingMono faxing
Fax memory256 pages
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax transmission speed3 sec/page
Digital sender-
Printing colorsBlack
Maximum duty cycle50000 pages per month
Number of print cartridges1
Page description languagesEpson LQ, IBM ProPrinter, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Processor model465S
Processor familyPowerPC
Card reader integratedNo
Maximum internal memory1536 MB
Sound power level (standby)27.5 dB
Sound pressure level (copying)51.5 dB
Sound pressure level (printing)51.3 dB
Sound pressure level (quiet mode)49 dB
Paper input typeCassette, Paper tray
Total input capacity300 sheets
Total output capacity- sheets
Maximum input capacity800 sheets
Total number of input trays2
Maximum number of input trays4
Auto document feeder (ADF) input capacity50 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Duplex media weight60 - 105 g/m²
Paper tray media typesEnvelopes, Plain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesFolio
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Auto Document Feeder (ADF) media weight50 - 120 g/m²
DisplayLCD
Product colorBlack, White
Market positioningBusiness
Display number of lines5 lines
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.3 W
Power consumption (standby)65 W
Power consumption (PowerSave)3.7 W
Power consumption (average operating)439 W
Mac operating systems supportedMac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
CertificationTUV, GS, CE
Sustainability certificatesBlue Angel, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth430 mm
Width494 mm
Height448 mm

Videos

How to Change Sleep Settings on Kyocera ECOSYS M2535dn Printer

Related product manuals