Kyocera ECOSYS M2535dn - Auto Cass.change

8-98
Default Setting (System Menu)
Auto Cass.Change
Select the action that takes place when the cassette runs out of paper during printing. Selections are as follows. The
default setting is [On].
Use the procedure below to set the Auto Cass.Change.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Auto Cass.Change].
4 Press the OK key. Auto Cass.Change appears.
5 Press the  or  key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Item Description
Off The printer displays Load Cassette # (# is a
cassette number) or
Load MP Tray , and
stops printing.
Load the paper according to the paper
source displayed to resume printing.
To print from the other paper cassette,
press
 or  to display Use alternative? ,
press
 or  to select the desired paper
source, and then press [OK].
On If there is another cassette with the same
size and type of paper, printing will
automatically continue.
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Auto Cass.Change: a b
1 Off
*********************
2 *On