Kyocera ECOSYS M2535dn - Displaying Network User Propertiy

11-12
Management
7 Press the OK key. Group Auth. appears.
8 Press the  or  key to select [On] or [Off].
9 Press the OK key.
Completed. is displayed and the screen returns to the
User/Job Account menu.
Displaying Network User Propertiy
Use the procedure below to display the property of the user logged on using the network authentication. This menu
can be used only when [Netwk Authentic.] is selected as the user authentication method.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the  or  key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
3 The User/Job Account menu appears.
4 Press the  or  key to select [User Login Set.].
Group Auth.: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.