Kyocera ECOSYS M2535dn - Display Bright

8
8-7
Default Setting (System Menu)
8 Press the OK key. Key Confirmation appears.
9 Press the  or  key to select [On] or [Off].
10 Press the OK key. Completed. is displayed and the
screen returns to the Buzzer menu.
Display Bright.
Set the brightness of the display.
Use the procedure below to adjust the display brightness.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Display Bright.].
4 Press the OK key. Display Bright. appears.
5 Press the  or  key to select the display brightness
from [Darker -3] to [Lighter +3].
6 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Original/Paper Settings
Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original size. The dimensions available are as follows.
Key Confirmation: a b
1 Off
*********************
2 *On
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Display Bright. : a b
3 Darker -1
*********************
5 Lighter+1
4 *Normal 0