Kyocera ECOSYS M2535dn - Sharpness

5
5-23
Sending Functions
Sharpness
Adjusts the sharpness of image outlines.
When copying penciled originals with rough or broken lines, clear copies can be taken by adjusting sharpness toward
"Sharpen". When copying images made up of patterned dots such as magazine photos, in which moire* patterns
appear, edge softening and weakening of the moire effect can be obtained by setting the sharpness toward "Blur".
The setting items are as follows.
* Patterns that are created by irregular distribution of halftone dots.
The procedure for adjusting the sharpness of copies is explained below.
1 Press the Send key.
2 Place the originals in the document processor or on the
platen.
3 Press the Function Menu key. Function Menu appears.
4 Press the  or  key to select [Sharpness].
5 Press the OK key. Sharpness appears.
6 Press the  or  key to select [-3 (Unsharpen)] to
[3 (Sharpen)].
7 Press the OK key.
Completed. is displayed and the screen returns to the
basic screen.
8 Press the Start key to start sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Item Description
1 to 3 (Sharpen) Emphasizes the image outline.
-1 to -3 (Unsharpen) Blurs the image outline. Can weaken a Moire* effect.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
Sharpness: a b
3 -1
*********************
5 +1
4 *0