Kyocera ECOSYS M2535dn - Subject and Body Entry

5-16
Sending Functions
Subject and Body Entry
When sending E-mail, enter the subject and body of the E-mail.
Use the procedure below to enter the subject and body for an E-mail message and then send the E-mail.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the Send key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the  or  key to select [Subject/Body].
5 Press the OK key. Subject Entry appears.
6 Enter the subject and press the OK key.
NOTE: Up to 60 characters can be entered for the subject.
7 Enter the body and press the OK key.
NOTE: Up to 500 characters can be entered for the body.
Completed. is displayed and the screen returns to the
basic screen for sending.
8 Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
Subject Entry: B b
*
ABC
[ Text ]
Body Entry: B b
*
ABC
[ Text ]