Preparation before Use
2-16
Installing Software
Install appropriate software on your PC from the included DVD (Product Library) if you want to use the printer function
of this machine or perform TWAIN / WIA transmission or Network FAX transmission from your PC.
Software on DVD (Windows)
You can use either [Express Install] or [Custom Install] can be selected for the installation method. [Express Install]
is the standard installation method. To install components that cannot be installed by [Express Install], use [Custom
Install]. For details, refer to Custom Install in the Installing Printer Driver in Windows on page 2-17.
Software Description
Installation method
●: Standard installation
○: Allows selection of
the components to be
installed
Express
Install
Custom
Install
KX DRIVER This driver enables files on a computer to be printed by
the machine. Multiple page description languages
(PCL XL, KPDL, etc.) are supported by a single driver.
This printer driver allows you to take full advantage of
the features of the machine.
Use this driver to print PDF files.
●
○
KX XPS DRIVER This printer driver supports the XPS (XML Paper
Specification) format developed by Microsoft
Corporation.
-
○
KPDL mini-driver/
PCL mini-driver
This is a Microsoft MiniDriver that supports PCL and
KPDL. There are some restrictions on the machine
features and option features that can be used with this
driver.
-
○
Kyocera TWAIN Driver This driver enables scanning on the machine using a
TWAINcompliant software application.
●
○
Kyocera WIA Driver WIA (Windows Imaging Acquisition) is a function of
Windows that enables reciprocal communication
between an imaging device such as a scanner and an
image processing software application. An image can
be acquired using a WIA-compliant
software application, which is convenient when a
TWAINcompliant software application is not installed in
the computer.
-
○
FAX Driver This makes it possible to send a document created in a
computer software application as a fax via the
machine.
-
○
Status Monitor The Status Monitor shows a print system status
message at the bottom right of the printing screen. You
can also start Command Center RX to check and
change printer settings.
●
○
KYOCERA Net Direct
Print
This makes it possible to print a PDF file without
starting Adobe Acrobat/Reader.
-
○
To Next Page
Loading...
