What to do if Kyocera ECOSYS M2535dn cannot feed paper set cassette 1?
If your Kyocera All in One Printer cannot feed paper set cassette 1, check if any of the paper feeders or the printer cassette upper than the selected one properly closed when one or more optional feeders are installed and close the paper feeder properly.
What to do if Kyocera ECOSYS M2535dn All in One Printer cannot feed originals?
If your Kyocera All in One Printer cannot feed originals, when placing originals in the document processor, align the original width guides securely before placing the originals.
How to fix Kyocera ECOSYS M2535dn dirty printouts?
If the printouts from your Kyocera All in One Printer are dirty, the platen or the document processor might be dirty. Clean the platen or the document processor.
What to do if Kyocera All in One Printer printouts are wrinkled?
If the printouts from your Kyocera All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if Kyocera ECOSYS M2535dn doesn't respond?
If the operation panel of your Kyocera All in One Printer does not respond when the power switch is turned on, plug the power cord into an AC outlet.
What to do if Kyocera ECOSYS M2535dn ejects blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, check the following: * When placing originals on the platen, ensure they are face-down and aligned with the slit glass. * When placing originals in the document processor, ensure they are face-up.
What to do if Kyocera All in One Printer cannot print?
If your Kyocera All in One Printer is not printing, check the following: * Ensure the machine is plugged into an AC outlet. * Verify the machine is powered on. * Make sure the printer cable is securely connected. * If the machine was powered on before connecting the printer cable, power it on again after connecting the cable. * If the print job is paused, press [Resume] to resume printing. * If an error message is displayed, follow the corresponding procedure.
What to do if Kyocera ECOSYS M2535dn printouts are too light?
If your Kyocera All in One Printer's printouts are too light, consider the following: * If the machine is in Manual Density mode, select the correct density level. * Ensure the toner is distributed evenly within the toner container by shaking it from side to side several times. * If there's a message indicating the need for more toner, replace the toner container. * If the paper is damp, replace it with new paper. * If EcoPrint mode is enabled, disable it. * Also, verify that the paper type setting is correct for the paper being used.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1800 x 600 DPI |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 7 s |
| Print speed (black, normal quality, A4/US Letter) | 35 ppm |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 6.9 s |
| Scan to | E-mail, FTP, SMB, USB |
| Scanner type | ADF scanner |
| Grayscale levels | 256 |
| Maximum scan area | Legal (216 x 356) mm |
| Scan speed (color) | 14 ppm |
| Image formats supported | JPG, TIF |
| Document formats supported | PDF, XPS |
| Faxing | Mono faxing |
| Fax memory | 256 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Digital sender | - |
| Printing colors | Black |
| Maximum duty cycle | 50000 pages per month |
| Number of print cartridges | 1 |
| Page description languages | Epson LQ, IBM ProPrinter, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3 |
| Processor model | 465S |
| Processor family | PowerPC |
| Card reader integrated | No |
| Maximum internal memory | 1536 MB |
| Sound power level (standby) | 27.5 dB |
| Sound pressure level (copying) | 51.5 dB |
| Sound pressure level (printing) | 51.3 dB |
| Sound pressure level (quiet mode) | 49 dB |
| Paper input type | Cassette, Paper tray |
| Total input capacity | 300 sheets |
| Total output capacity | - sheets |
| Maximum input capacity | 800 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 4 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Custom media width | 70 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 148 - 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes, Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Auto Document Feeder (ADF) media weight | 50 - 120 g/m² |
| Display | LCD |
| Product color | Black, White |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 65 W |
| Power consumption (PowerSave) | 3.7 W |
| Power consumption (average operating) | 439 W |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Certification | TUV, GS, CE |
| Sustainability certificates | Blue Angel, ENERGY STAR |
Weight and Dimensions| Depth | 430 mm |
|---|---|
| Width | 494 mm |
| Height | 448 mm |
To Next Page
