6-4
Scanning
Scanning using TWAIN/WIA
This section explains how to scan an original using TWAIN/WIA.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same way.
1 Place the originals. For details, refer to Loading Originals on page 3-12.
2 Activate the TWAIN compatible application.
3 Select the machine using the application and display the TWAIN screen.
4 Select scanning settings in the TWAIN screen that opens.
The settings that appear in the TWAIN screen are as follows.
Note For selecting the machine, see the Operation Guide or Help for each
application software.
No. Item Description
1 Original size Specify the size of originals being scanned.
Value: Letter, Statement, Executive, A4, A5, A6, B5 (JIS), B5 (ISO), 16K, Custom,
A5-R (A5 (Landscape))
Note Refer to Configuration on page 3-51 for selecting Custom.
2 Scan color Select the color mode setting.
Value: Monochrome, Grayscale, Full color
3 Resolution Select fineness of scanning resolution.
Value: 200 × 200 dpi, 300 × 300 dpi, 400 × 400 dpi, 600 × 600 dpi
4Sharpen Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines and reduces the sharpness.)
To Next Page
Loading...
