3-31
Preparation
Wireless Network Setup (MA2001w/MA2000w only)
When the wireless network connection settings are configured, it is possible to print or send in a wireless network (wireless
LAN) environment.
Configuring the wireless network settings, follow the steps below:
1 Install the printer driver for USB connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-13 or Installing
Drivers and Utilities (For installation from our website) on page 3-21.
2 Configure network connection. There are three ways to configure.
• Configuring Network Connection Using the Push Button (page 3-31)
• Configuring Network Connection Using the Wireless Network Setup Tool (page 3-32)
• Configuring Network Connection by Entering a PIN (page 3-34)
3 Install the printer driver for wireless network connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-13 or Installing
Drivers and Utilities (For installation from our website) on page 3-21.
Install the printer driver for USB connection on your computer
1 Connect the machine with a computer via USB cable when the machine is powered on.
2 Turn on the computer.
3 Install the printer driver for USB connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-13 or Installing
Drivers and Utilities (For installation from our website) on page 3-21.
Configuring Network Connection Using the Push Button
If your router supports WPS, you can configure network connection using the push button.
1 Turn on the computer.
2 Press [Wireless Network] ( ) on the operation panel of the machine.
The wireless network indicator flashes.
3 Press the push button on the router.
The network between this machine and the router is configured. If the network connection between this machine and
the router is complete, [Wireless Network] ( ) will light up.
4 Install the printer driver for wireless network connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-13 or Installing
Drivers and Utilities (For installation from our website) on page 3-21.
Note Before configuring the wireless network settings, connect the computer to the access point of the network or
wireless router.
To Next Page
Loading...
