8-6
Maintenance
6 Set the toner cartridge to its position, aligning the guides at both ends with the slots in the machine. After that, press
the levers on both ends of the toner cartridge until they click.
7 Close the top cover.
8 Press and hold [Stop] ( ) and Mode Select key for 5 seconds to stop flashing of the Attention Indicator.
Note If you hear a noise after closing the top cover, remove drum unit and toner cartridge and set them again.
Note You can also stop flashing of the Attention Indicator from the Maintenance Menu of the KYOCERA Client Tool.
Refer to Maintenance Menu on page 8-15.
To Next Page
Loading...
