3-11
Preparation
4 Load the paper all the way in the cassette until the paper touches the far inner side. Ensure the side to be printed is
facing up and the paper is not folded, curled, or damaged.
5 Specify the paper size and type for the cassette using KYOCERA Client Tool. For more information, refer to
Configuration on page 3-51.
IMPORTANT Adjust so that there is no gap between the paper length guide and the paper.
Note Load an amount of paper that fits under (does not contact) the tabs on the width guides.
When using A5 (Landscape) paper, load the paper as shown in the illustration.
Note When using A5 (Landscape) paper, do not close the front cover.
Note Set the same paper size to the paper size that is set on the machine.
To Next Page
Loading...
